Properties

  • ✔ Strong bonding to subsequent coating
  • ✔ Smooth finish to rough plasters
  • ✔ Superior crack filling
  • ✔ Alkali resistance.
  • ✔ Easy application
  • ✔ Quick-drying
Technical Data Sheet

Excellent Wall Filling

Promax Excellent Wall Filling - Acrylic Based is a water-based, ready to use putty which provides a strong and smooth foundation for a perfect paint finish. It is a technologically advanced product that has excellent filling and binding properties. It dries quick and leaves behind a super smooth surface ready for the application of a topcoat. This is a water-based putty used on Primer Sealer Undercoat which provides a rich, smooth finish when applied on masonry walls to fill substrate imperfections.

Its unique properties and consistency ensure easy applicability, excellent fitting, levelling and sanding properties. It is a product for filling blemishes, cracks and holes on masonry surfaces and patching up surface imperfections on plastered walls, wood, hardboard and chipboards.



Applications



New or Bare Surfaces :


The surface must be clean, dry and free from efflorescent salts. Scuff the surface with suitable sandpaper to make the surface smooth. Remove dust and apply 1 coat of Promax Primer Sealer Undercoat. Fill surface imperfections with 1-2 coats of Promax Excellent Wall Filling and let it completely dry before applying 2-3 coats of Promax top coat.


Previously painted sounded surfaces:


Scrape off all the loosely adherent paint from the surface with an appropriate abrasive paper or stiff brush. Remove dust and apply 1 coat of Promax Primer Sealer Undercoat. Fill surface imperfections with 1-2 coats of Promax Excellent Wall Filling and let it completely dry before applying a coat of Promax top coat.




Benefits



Excellent Leveling

Higher Coverage to top

Top-coat Adhesion

Workability

Excellemt Adhesion

Water Vapour impermeability



Information and Care



Environmental Health and Safety


  • Avoid contact with eyes and prolonged or repeated contact with skin.
  • Use only sufficient ventilation during application and drying.
  • Do not breathe spray mist or sanding dust.
  • If swallowed, it may cause serious damage.
  • Use dust mask during application, sanding and clean up.
  • Wash thoroughly after handling.
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
  • Close container after each use.
  • In case of skin contact, immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists
  • When empty, don’t use its container for edible storage.

After Painting Care


  • Remove all dirt using a clean cloth or duster. Always remove dirt from top to bottom. This helps in avoiding loose dirt blotch the walls.
  • For household marks like pencil,tea,coffee,crayons,turmeric,ketchup,sketch pen etc. use liquid dish wash/mild detergent solution. Use a sponge to remove the stains. Wipe the area with a clean cloth.
  • Walls in children’s rooms get dirty faster than the rest of the house. Repainting with a single coat of paint every two years will keep the surface looking fresher. Make sure old paint is sanded lightly before the new coat is painted on.
  • Walls of passages, kitchens and children’s rooms are easily soiled. Clean these areas regularly at least once a month on a specific day with a sponge and mild soap solution. Do not scrub unnecessary as that might damage the paint film. However, highly washable paints usually have good scrub resistance.